WATERPROOFING PRODUCTS LIST
DONCRETE-A&B : It is an Acrylic Polymer Based, highly elastomeric waterproofing membrane; uses in for waterproofing of Roofs, Dams, Water Reservoirs, Water tanks Sunken, Slab and all type of underground structures. : 1.2Kg/m2 Conforming to IS: 13435 Part-3 DIN-1048 BS : 1881- Part-208. More…..
SUPERCRETE-SB : It is acrylic co-polymer based emulsion + cements based water proofing coating for roof, terrace Garden, sunken area, basements, swimming pools, water tank etc For two coats. Conforms to IS: 13435, Part-3 Mixing ratios: 1.0 Kg SUPERCRETE SB: 0.75 Liter : 2 Kg Cement. More……
DONCRETE 105 : Two parts pre- packed solvent free high build tar extended epoxy water proof coating, excellent, adhesion abrasion resistant flexible durable, is easy to use water proofing system. Economical provides DFT 400-500 microns, more suitable for terrace garden, Coverage:9-10m2 / 10 kg pack. ( Base + hardener).
DONCRETE RMW : Two-in-one integral water proofing admixture for concrete, increases durability, improves plasticity, cohesion, easier placing, better compaction & finishing. Chloride free, Conforms to: IS: 2645:1999. Optimum Dosage. 150 to 200 ml. per 50 Kg. of cement. More……
DONCRETE MIX : High workable mortar plasticizer cum waterproof plaster additive in powder form. Gives better consistency, prolonged work ability, smooth & creamy mortar even with coarse sand. Reduces drying shrinkage cracks & mortar dropping. Improves finish greater resistance to frost, damage during construction, reduces permeability hence ensures waterproof plaster, increases the yield of mortar by 8 to 10% and results into cost benefits. Conforms to: BS 4887 Part-1, 1986, IS 2645 Dosage: 1.00 Kg. per 50 Kg. of cement.
Doncrete Mix-1: It is polymeric additive for cement and is called Doncrete Mix-1 because, it maximixe the cement surface area and it makes use of each and every particle of cement for the purpose of its use.
Doncrete Saltpetre : Technically Saltpetre is efflorescence or erosion or is simply corrosion.
DONCRETE (T) : Single pack, trowel applied, cementations, fiber reinforced, waterproof screed. To be used along with primer. 10 mm. Thick screed provides excellent water tightness. Resist hydrostatic pressure. Compensate mortar increases the comprehensive & tensile strength of screed. Recommended for terrace slab, basement, water tank, reservoirs. Etc. coverage: a pack of 25 kg is sufficient for 1.4 m2 @ 10 mm thick screed. Confirms to ASTM-355, DIN-1048 BS : 4551.
DON PLUG : Non shrink, non metallic, high strength water plug, fast setting plugging, compound for stoppage of running water and seepage through concrete and masonry walls, dams, wall and floor junctions. Dosage-12 ltrs. Per 50 kg of cement. More……….
DONCRETE-72 : Silicon based water repellent coating providing a durable barrier to water penetration of porous surface. Reduces chemical attack minimizes efflorescence’s colorless maintains natural color of stones, bricks etc. coverage between 4-5sqr.mtr per liter mix material. Conforms to BS 6477.:1984 groups 1 & 2 IS: 12027. More……
DONCRETE-72-A : It is a very economical ready to use solution of active silicone based designed to water repellency to a wide variety of surfaces live bevies, store, plaster . it do not make a net or film but penetrating of stores, masonry and concrete. Conforming to IS: 12027-1987/ASTM-E-514-1974, Coverage – 5.0 to 5.2 sq.m depending on porosities of the surface. More……
DONCRETE-73 : Solvent based water repellent coating for stone, bricks, concrete or other construction materials, converge one liter mix 4-5 m2 per liter. Conforms to IS: 12027-1987. More….
DONCRETE-83 : Transparent silicon based water repellent hydrophobic surface to masonry, concrete & asbestos sheets. Excellent water repellent, minimizes efflorescence, is provides durable barrier to water penetration on porous surfaces, ideal for exposed brick work, stone work and concrete blocks. Conforms to BS-6477 1984 group 1 & 2. Coverage : 3-4m2 per ltr. conforms to IS 12027. More…..
DONCRETE-107(EMA) : Polyurethane based waterproofing product which is durable and li uied apploied comverage 1.00m Liter/coats@1000micron Conforming to ASTM-D-570,ASTM-D2240,ASTM-D-624,ASTM-D-836,ASTM-E-96,ASTM-D-4060,,ASTM-D-4541,ASTM-D-1737,ASTM-D-543,ZERO VOC for STPs,WTP,DHT,Tunnel,Subway.Terrace Gardens, Roof, Dam,Reservoir & Sea Water Area. More……..
DONCRETE CWC : It is a single component crystalline based coating on new or lod structure like basemnet, roof slab,aand all type of water retaining strucutre. Coverage : vertical surface 0.65-00.80 kg/m, horizontal surface-0.8kg. – 1.0kg/m mixed with water as per TDS.
DONCRETE CWA-100(Special) : It is hydrophobic pore blocking crystallin waterproofing admixture for under ground structure, STP?WTPTerrace/Podium deck swimming pools, foundation dams, protable water tank, etc doge: 0.80 to 2% by weight of cement conforming to DIN – 1048,BS:EN:12390-8 BIS:3685. More……
DONCRETE-CM : It is crystalline based grey highbound strength compound for patcing and repair work, comforming to ASTM-C-109/ASTM-C-190,DIN-1048.
DONCRETE-CWG : its is crystalline based single compound grey powder mix with water which is suitable for injection grouting work. In-honey-comb crakes and repairs area. Conforming to ASTM-C109,ASTM-C-190.
DONCRETE-Polyurea : (Nukote ST – Standard Pure Polyurea) is designed for water proofing and anti-crrosion, two components, Zero Voc, recommended for terrance/terrace garden, WTP/STP and parking area etc.
DONCRETE-PT : It is epoxy based, two component flexible. Membrane/barrier coating for pederstrian,Vehucular traffic area/terrance garden, tunnel. STP/WTP reservoirs etc.
DONCRETE-2033 : High pressure water stop injection material for tunnels, dams, STP/WTP, utility boxes, water reservoirs etc. conforming to ASTM-D-638,ASTM-C-273.
DONCRETE-2700L : It is a low viscosity based on a MDI (Methylene-Diphenyl-Isocynate). For water stop injection material for tunnels dams, STP/WTP, utility boxes, water reservoirs all tupe of under soured structure. Confroming to ASTM-D-1010,ASTM-D-638.
DONCRETE-95-TX : It is a multi components injection system for joints, crakes, cavities, tility boxex, core cutting joint etc. Conforming to DIN-52455, DIN-53479 DIN-EN-1504,ASTM-D-638.
DONCRETE-SS : Soil stabilization injection is a two component organomineral risin which cures to a solid resin. Rapid hardening, tow-component organomineral resin water-displacing high compressive and tensile strength. DIN-EN-196T1.
DONCRETE-PRC : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
DONCRETE-2133 FLEX : HYDROPHOBIC, WATER-REACTIVE, CLOSED-CELL ELASTOMER FOAM FOR DURABLY SEALING INJECTION MEASURES.
DONCRETE- CM (Crystalcrete)Crystalline Waterproofing : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete Crystalline : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete CWA-200 : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete CWA-300 : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete J-S : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete NPML : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.