CONSTRUCTION GROUTS LIST
DON GROUT GP-1 : Non shrink, high strength, free flowing and self levelling, non metallic chloride free cementations grout for general purpose grouting for static loads, as well as centrifugal and rotary machines in cement, textile, paper, steel industries etc. attains 500kg./Sqr. cm. Compressive strength @28 days, expansion – 0.8% to 1.5%, density 1800 kg./sqr.mtr. Water powder ratio pours able 0.17, flowable-00.19. Conforming ASTM-C-1107, BS : 1881 Part-116. More…..
DON GROUT GP-2 : Non shrink, high strength, free flowing and self leaving, non metallic, chloride free, recementatitious grout for general purpose grouting for dynamic load, freely flows under base plates and bolt pockets, high early and ultimate strength, attains 650kg/sqr. cm. Compressive strength @ 28 days, expansion -0.8% to 1.5%, water powder ratio pour able, 0.15, flowable 0.16. Conforming ASTM-C-1107, BS : 1881 Part-116. More……
DON GROUT ADD : Non shrinkage, super plasticizer, irons free. Chloride free, grout additive. Produces easy flowing cohesive grout, attains higher strength. Ideal for static load. Dosage: 200 gm per 50kg.of cement. Conforming to ASTM-C-827-87. More……..
DON GROUT EP : Non-shrink, high strength, free flowing three-part, high performance epoxy grout. A unique epoxy grout system even for running industry with minimum production shut down. Ideal for very heavy dynamics loads like heavy duty rails, machineries, compressors, dowels bars, studs etc. high tensile & flexural strength attains compressive n 7 days. Conforming to BS : 6319, Part-3 / BS : 5080 Part-1. More……
DON GROUT-IP : High strength, thyrotrophic, two-part polyester resin grout. Vibration and corrosion resistant, attains ultra high compressive and pull out strength. Rapid setting and can be used under water. Designed for grouting of steel bars/bolt into concrete, stones, machinery and brick work where speed of installation and early load bearing capacity is required. Conforming to BS : 6319 Part-2. More……
DON GROUT-M : Low viscosity, high penetrating, ultra high strength. Two-part, solvent free, epoxy based injection grout. Attains high early and ultimate strength. Conforming to ASTM-C-881, Type 2nd and 4th Grade-1, BS:6319. More……
DON GROUT-M2 : RIGID INJECTION RESIN DESCRIPTION: Solvent-free, low viscosity, epoxy-based duromer resin,Long application time,High compressive and flexural strength,Good capillary absorption,Good adhesion to concrete and steel. AREAS OF APPLICATION: – Rigid filling of cracks, joints and voids in building construction and civil engineering under dry conditions and Filling of injection hoses.
Doncrete CWG : Single component, Used to grout against active leakages, seal joints and make waterstop profiles non matellic non shrink.