WATERPROOFING PRODUCTS LIST
DONCRETE-A&B : is a high performance polymer modified two pack coating system which requires only simple on site mixing to provide a highly effective, hard wearing, waterproof membrane. : 2 Kg per m2 for 1.00 mm Conforming to IS: 13435 Part-3 DIN-1048 BS : 1881- Part-208. More…..
DONCRETE-Superflex + is a high elastic, waterproofing cement based material. With special waterproofing properties, easy to use by plastering, applying by using a brush and roller or trowel. Can be painted or overlaid. Use with waterproofing for non-toxic water tanks, can be used with drinking water. 1.1 kg./m/coat for 1 mm More…..
DONCRETE – SUPER FLEX is a high performance polymer modified two pack coating system which requires only simple on site mixing to provide a highly effective, hard wearing, waterproof membrane.2 Kg per/ m2/mm Conforms to IS: 13435 Part-3-1992/DIN-1048/BS : 1881 Part – 208/CRD-C-48/DIN – 52617 More…..
DONCRETE– Flex-PU is a high-performance single component moisture cured pure polyurethane self-leveling elastomeric liquid membrane.1.30 Kg – 1.40 Kg per sqm More…..
DONCRETE– Flex-PU-WB is a high-performance aliphatic single component water-based UV resistant, ecofriendly, flexible modified polyurethane cold applied coating membrane. It cures to a permanently flexible seamless membrane with good adhesion to various range of substrates. It does not embrittle with age or exposure to UV light. 1.70 – 1.80 Kg per sqm for 1 mm More…..
SUPERCRETE-SB : It is acrylic co-polymer based emulsion + cements based water proofing coating for roof, terrace Garden, sunken area, basements, swimming pools, water tank etc For two coats. Conforms to IS: 13435, Part-3 Mixing ratios: 1.0 Kg SUPERCRETE SB: 0.75 Liter : 2 Kg Cement. More……
DONCRETE 105 : Two parts pre- packed solvent free high build tar extended epoxy water proof coating, excellent, adhesion abrasion resistant flexible durable, is easy to use water proofing system. Economical provides DFT 400-500 microns, more suitable for terrace garden, Coverage:9-10m2 / 10 kg pack. ( Base + hardener).
DONCRETE RMW : Two-in-one integral water proofing admixture for concrete, increases durability, improves plasticity, cohesion, easier placing, better compaction & finishing. Chloride free, Conforms to: IS: 2645:1999. Optimum Dosage. 150 to 200 ml. per 50 Kg. of cement. More……
DONCRETE MIX : High workable mortar plasticizer cum waterproof plaster additive in powder form. Gives better consistency, prolonged work ability, smooth & creamy mortar even with coarse sand. Reduces drying shrinkage cracks & mortar dropping. Improves finish greater resistance to frost, damage during construction, reduces permeability hence ensures waterproof plaster, increases the yield of mortar by 8 to 10% and results into cost benefits. Conforms to: BS 4887 Part-1, 1986, IS 2645 Dosage: 1.00 Kg. per 50 Kg. of cement. More……
Doncrete Mix-1: It is polymeric additive for cement and is called Doncrete Mix-1 because, it maximixe the cement surface area and it makes use of each and every particle of cement for the purpose of its use. More……
Doncrete Saltpetre : Technically Saltpetre is efflorescence or erosion or is simply corrosion. Without going deeply into chemical reaction/process we simply specify here that CARBONATION is a series of natural chemical reaction which reduces alkalinity of concrete, bricks, cemented surface. More……
DONCRETE (T) : Single pack, trowel applied, cementations, fiber reinforced, waterproof screed. To be used along with primer. 10 mm. Thick screed provides excellent water tightness. Resist hydrostatic pressure. Compensate mortar increases the comprehensive & tensile strength of screed. Recommended for terrace slab, basement, water tank, reservoirs. Etc. coverage: a pack of 25 kg is sufficient for 1.4 m2 @ 10 mm thick screed. Confirms to ASTM-355, DIN-1048 BS : 4551. More……
DON PLUG : Non shrink, non metallic, high strength water plug, fast setting plugging, compound for stoppage of running water and seepage through concrete and masonry walls, dams, wall and floor junctions. Dosage-12 ltrs. Per 50 kg of cement. More……….
DONCRETE-72 : Silicon based water repellent coating providing a durable barrier to water penetration of porous surface. Reduces chemical attack minimizes efflorescence’s colorless maintains natural color of stones, bricks etc. coverage between 4-5sqr.mtr per liter mix material. Conforms to BS 6477.:1984 groups 1 & 2 IS: 12027. More……
DONCRETE-73 : Solvent based water repellent coating for stone, bricks, concrete or other construction materials, converge one liter mix 4-5 m2 per liter. Conforms to IS: 12027-1987. More….
DONCRETE-83 : Transparent silicon based water repellent hydrophobic surface to masonry, concrete & asbestos sheets. Excellent water repellent, minimizes efflorescence, is provides durable barrier to water penetration on porous surfaces, ideal for exposed brick work, stone work and concrete blocks. Conforms to BS-6477 1984 group 1 & 2. Coverage : 3-4m2 per ltr. conforms to IS 12027. More…..
DONCRETE-107(EMA) : Polyurethane based waterproofing product which is durable and li uied apploied comverage 1.00m Liter/coats@1000micron Conforming to ASTM-D-570,ASTM-D2240,ASTM-D-624,ASTM-D-836,ASTM-E-96,ASTM-D-4060,,ASTM-D-4541,ASTM-D-1737,ASTM-D-543,ZERO VOC for STPs,WTP,DHT,Tunnel,Subway.Terrace Gardens, Roof, Dam,Reservoir & Sea Water Area. More……..
DONCRETE CWC : It is a single component crystalline based coating on new or lod structure like basemnet, roof slab,aand all type of water retaining strucutre. Coverage : vertical surface 0.65-00.80 kg/m, horizontal surface-0.8kg. – 1.0kg/m mixed with water as per TDS. More……..
DONCRETE CWA-100(Special) : It is hydrophobic pore blocking crystallin waterproofing admixture for under ground structure, STP?WTPTerrace/Podium deck swimming pools, foundation dams, protable water tank, etc doge: 0.80 to 2% by weight of cement conforming to DIN – 1048,BS:EN:12390-8 BIS:3685.More……..
DONCRETE-CM : It is crystalline based grey highbound strength compound for patcing and repair work, comforming to ASTM-C-109/ASTM-C-190,DIN-1048.More……..
DONCRETE-CWG : its is crystalline based single compound grey powder mix with water which is suitable for injection grouting work. In-honey-comb crakes and repairs area. Conforming to ASTM-C109,ASTM-C-190.
DONCRETE-PT : It is epoxy based, two component flexible. Membrane/barrier coating for pederstrian,Vehucular traffic area/terrance garden, tunnel. STP/WTP reservoirs etc. More……..
DONCRETE-2133 : is ready to use. The resin is one- component injected with injection pumps into water- bearing structures or ground. Dry structures must first be filled with water. The application time is unlimited. DONCRETE 2133 starts to react when it hits water. More……..
DONCRETE-2700L : It is a low viscosity based on a MDI (Methylene-Diphenyl-Isocynate). For water stop injection material for tunnels dams, STP/WTP, utility boxes, water reservoirs all tupe of under soured structure. Confroming to ASTM-D-1010,ASTM-D-638. More……..
DONCRETE-95-TX : It is a multi components injection system for joints, crakes, cavities, tility boxex, core cutting joint etc. Conforming to DIN-52455, DIN-53479 DIN-EN-1504,ASTM-D-638.
DONCRETE-SS : Soil stabilization injection is a two component organomineral risin which cures to a solid resin. Rapid hardening, tow-component organomineral resin water-displacing high compressive and tensile strength. DIN-EN-196T1.
DONCRETE-PRC : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
DONCRETE-2133 FLEX : HYDROPHOBIC, WATER-REACTIVE, CLOSED-CELL ELASTOMER FOAM FOR DURABLY SEALING INJECTION MEASURES. More……..
DONCRETE- CM (Crystalcrete)Crystalline Waterproofing : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete Crystalline : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete CWA-200 : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete CWA-300 : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete J-S : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
Doncrete NPML : The spray applied liquied acrylic polymer resin membrane water proof products ASTM-D-4541 (2.00 MPa minumum) 2.5 mm minimum dry fild thikness and spray in a minimum of two coats of contrasting colours. Elongation at break 130% minimum, tensile strength4.0 MPa.
DONCRETE-LBP: system is a single component, Lime-Modified moisture cured advanced liphatic polyurethane based liquid applied membrane specially designed for waterproofing of Lime Based Polyurethane subjected to high flexibility. It is an elastic membrane forming material, hence it can provide good crack bridging up to 2mm in concrete. More….
DONCRETE-MPB : It is composed of acrylic co-polymer emulsions & additives. It is used as bonding agent for new to old substrates & cement mortar modifier because it provides strong bonds to old & new concrete. Improves tensile & flexural strength of concrete and increases the durability of the structure. When mixed with cement, It forms a matrix & provide excellent waterproof coating.. More….
DONCRETE-URP : is based on styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency.DONCRETE -URP is used for repair of spalled concrete-floors, columns, beams, chhajas, slabs. Waterproof- ing of toilets & bathrooms, small terraces etc. DONCRETE -URP bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.More….
DONCRETE-WP : is a high solid content (50%) acrylic co-polymer liquid, which when mixed with cement, forms a matrix & hence provides excellent waterproofing properties. It can also be used as a bonding agent for new to old cementitious substrates & as an additive for repair mortars..More….
DONPOWERCRETE :Acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces.Concrete structures like sunken portion, toilets, balcony, basement chajjahs terrace, concrete repairs and water retaining structures.More….
DONCRETE-LW++ :It is based on specially processed lingo sulphonate and additive and supplied as a brown liquid readily miscible with water. Concrete however well made is to some extent porous and water must be prevented from penetrating through capillary pores. The presence of water in hardened concrete can cause corrosion of reinforcement which is made severe by freezing and thawing of concrete containing absorbed moisture. Further deterioration can occur if the water penetrating the concrete contains dissolved aggressive salts..More….